UPS
Showing all 8 results
-
Computing, UPS
APC Easy-UPS 650VA (BV650I-MSX)
Output
Max Configurable Power (Watts)375Watts / 650VAOutput Frequency (not synced)50/60 Hz +/-1 HzTopologyLine InteractiveWaveform typeStepped approximation to a sinewaveTransfer Time6ms typical : 10ms maximumInput
Input frequency50/60 Hz +/- 5 Hz (auto sensing)Number of Power Cords1Batteries & Runtime
Battery typeMaintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproofExpected Battery Life (years)3 – 5EfficiencyView Efficiency GraphCommunications & Management
Control panelLED Status display with On Line : On BatteryAudible AlarmAlarm when on battery : distinctive low battery alarm : overload continuous tone alarmSKU: n/a -
Computing, UPS
APC Smart-UPS SRT 10000VA 230V (SRT10KXLI)
SRT10KXLIFeatures
APC Smart-UPS SRT 10000VA 230V
High density, double-conversion on-line power protection with scalable runtime
Includes : CD with software , Documentation CD , Installation guide , Temperature Probe , USB cable , Warranty card ,
Web/SNMP Management Card
-
10/100 BaseT ConnectionConnect the device to a network using a 10 or 100 BaseT connection
-
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventivemaintenance
-
Green modePatent-pending operating mode that bypasses unused electrical components in goodpower conditions to achieve very high operating efficiency without sacrificing any Protection.
-
LCD graphics displayText and mimic diagrams that display modes of operation, system parameters andalarms.
Smart-UPS On-LineFeatures & Benefits
Manageability
-
LED status indicatorsQuickly understand unit and power status with visual indicators.
-
Serial connectivityProvides management of the UPS via a serial port.
-
Network manageableProvides remote power management of the UPS over the network.
-
InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.
-
SmartSlotCustomize UPS capabilities with management cards.
Availability
-
Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS poweroverload or fault.
-
Scalable runtimeAllows additional run time to be quickly added as needed.
-
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent,precision charging.
-
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteriesare being replaced
-
Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utilitypower.
-
Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to batterytemperature.
Serviceability
-
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades andreplacements of the batteries reducing Mean Time to Repair (MTTR)
-
Audible alarmsProvides notification of changing utility power and UPS power conditions
-
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needsto be replaced.
-
Disconnected battery notificationWarns when a battery is not available to provide backup power.
-
Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.
Marketing Features
-
Avoids costly power problems by keeping your IT equipment and data protected and available.Network grade power conditioning protects from damaging surges and disruptive noise.The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
-
Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers usingactive power factor corrected (PFC) power supplies. Safety agency tested and approvedmeans that you can deploy Smart-UPS with confidence that they meet or exceed theindustry’s most rigorous standards.
-
Save time with easy and convenient remote/network accessibility.Network manageable via serial, USB or Ethernet. Includes Powerchute® Software forconvenient monitoring and control, safe operating system shutdown, and innovativeenergy management capabilities.
-
Low operating and maintenance costs with proven reliability and intelligent battery management.Intelligent battery management, pioneered by APC, maximizes battery performanceand life through intelligent, precision temperature compensated charging. Automaticself tests insure battery reliability and warn customers in advance of battery replacement.Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Adaptability
-
Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.
-
Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
-
Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mountenvironment.
Protection
-
Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditionswithout using the battery.
-
Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
-
Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.
-
Cold-start capableProvides temporary battery power when the utility power is out.
-
Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connectedservice provider equipment and within the specified environment.
-
Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.
Output
-
Output power capacity
10.0 KWatts / 10.0 kVA
-
Max Configurable Power (Watts)
10.0 KWatts / 10.0 kVA
-
Nominal Output Voltage
230V
-
Output Voltage Distortion
Less than 2%
-
Output Frequency (sync to mains)
50/60Hz +/- 3 Hz
-
Other Output Voltages
220, 240
-
Load Crest Factor
3 : 1
-
Topology
Double Conversion Online
-
Waveform type
Sine wave
-
Output Connections(6) IEC 320 C13 (Battery Backup)(4) IEC 320 C19 (Battery Backup)(1) Hard Wire 3-wire (H N + G) (Battery Backup)(3) IEC Jumpers (Battery Backup)
-
Bypass
Internal Bypass (Automatic and Manual)
Input
-
Nominal Input Voltage
230V , 400V 3PH
-
Input frequency
40 – 70 Hz (auto sensing)
-
Input Connections
Hard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH + N + G)
-
Input voltage range for main operations
160 – 275V
-
Input voltage adjustable range for mains operation
100 – 275 (half load), 173 – 476 (half load)V
-
Other Input Voltages
220, 240, 380, 415
Batteries & Runtime
-
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Typical recharge time
1.5hour(s)
-
Replacement Battery
APCRBC140
SKU: n/a -
-
Computing, UPS
APC Smart-UPS SRT 6000VA 230V (SRT6KXLI)
SPECIFICATIONS :
-
Output power capacity
6.0 KWatts / 6.0 kVA
-
Max Configurable Power (Watts)
6.0 KWatts / 6.0 kVA
-
Nominal Output Voltage
230V
-
Output Voltage Distortion
Less than 2%
-
Output Frequency (sync to mains)
50/60Hz +/- 3 Hz
-
Other Output Voltages
220, 240
-
Load Crest Factor
3 : 1
-
Topology
Double Conversion Online
-
Waveform type
Sine wave
-
Output Connections(4) IEC 320 C19 (Battery Backup)(6) IEC 320 C13 (Battery Backup)(1) Hard Wire 3-wire (H N + G) (Battery Backup)(2) IEC Jumpers (Battery Backup)
-
Bypass
Internal Bypass (Automatic and Manual)
Input
-
Nominal Input Voltage
230V
-
Input frequency
40 – 70 Hz (auto sensing)
-
Input Connections
Hard Wire 3 wire (1PH+N+G)
-
Input voltage range for main operations
160 – 275V
-
Input voltage adjustable range for mains operation
100 – 275 (half load)V
-
Other Input Voltages
220, 240
Batteries & Runtime
-
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Typical recharge time
1.5hour(s)
-
Replacement Battery
APCRBC140
-
Expected Battery Life (years)
3 – 5
-
RBC Quantity
1
-
Extendable Run Time
1
-
Extended Run Options
APC-Smart-UPS-SRT-6000VA-230V
-
RuntimeView Runtime GraphView Runtime Chart
-
EfficiencyView Efficiency Graph
Communications & Management
-
Interface Port(s)
RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB
-
Control panel
Multi-function LCD status and control console
-
Audible Alarm
Audible and visible alarms prioritized by severity
-
Emergency Power Off (EPO)
Yes
-
Available SmartSlot™ Interface Quantity
1
Surge Protection and Filtering
-
Surge energy rating
480Joules
Physical
-
Maximum Height
432mm , 43.2CM
-
Maximum Width
174mm , 17.4CM
-
Maximum Depth
719mm , 71.94CM
-
Net Weight
60.0KG
-
Shipping weight
67.0KG
-
Shipping Height
370mm , 37.0CM
-
Shipping Width
610mm , 61.0CM
-
Shipping Depth
960mm , 96.0CM
-
Color
Black
-
Units per Pallet
6.0
Environmental
-
Operating Temperature
0 – 40 °C
-
Operating Relative Humidity
0 – 95% non-condensing %
-
Operating Elevation
0-3000meters
-
Storage Temperature
-15 – 45 °C
-
Storage Relative Humidity
0 – 95% non-condensing %
-
Storage Elevation
0-15000meters
-
Audible noise at 1 meter from surface of unit
55.0dBA
-
Online thermal dissipation
1300.0BTU/hr
-
Protection Class
IP 20
SKU: n/a -
