Gigabyte Aorus Z790 Aorus Master X Ddr5 Motherboard - Black

CPU 

• LGA1700 socket : Support for the 14th, 13th, and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors*

• L3 cache varies with CPU
  

Chipset

• Intel® Z790 Express Chipset

Memory

•  Support for DDR5 8266(O.C) / 8200(O.C) / 8000(O.C) / 7950(O.C) / 7900(O.C) / 7800(O.C) / 7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 MT/s memory modules

• 4 x DDR5 DIMM sockets supporting up to 192 GB (48 GB single DIMM capacity) of system memory Dual channel memory architecture

• Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

• Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

• Support for Extreme Memory Profile (XMP) memory modules

Onboard Graphics

• (The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to "Memory Support List" for more information.)

• Integrated Graphics Processor-Intel® HD Graphics support:

• - 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz

• * Support for DisplayPort 1.2 version and HDCP 2.3

• Realtek® ALC1220-VB CODEC

• * The front panel line out jack supports DSD audio.

Audio

• ESS ES9118 DAC chip

• Support for DTS:X® Ultra

• High Definition Audio

• 2/4/5.1-channel

* You can change the functionality of an audio jack using the audio software. To configure 5.1-channel audio, access the audio software for audio settings

LAN

• Marvell® AQtion AQC113C 10GbE LAN chip
  (10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps)

Wireless Communication module

• Qualcomm® Wi-Fi 7 QCNCM865 (PCB rev. 1.0)

• - 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands

• - BLUETOOTH 5.3

• - Support for 11be 320MHz wireless standard

• (Actual data rate may vary depending on environment and equipment.)

Expansion Slots

        CPU:

• - 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)

• * The PCIEX16 slot shares bandwidth with the M2C_CPU connector. The PCIEX16 slot operates at up to x8 mode when a device is installed in the M2C_CPU connector.

• * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

        Chipset:

• - 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4)

• - 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x1 (PCIEX1)

Storage Interface

        CPU:

• - 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0 x4/x2 SSD support) (M2C_CPU)

• - 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

        Chipset:

• - 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2Q_SB)

• - 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support)(M2P_SB)

• - 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB)

• - 4 x SATA 6Gb/s connectors

• RAID 0, RAID 1, RAID5, and RAID 10 support for NVMe SSD storage devices

• RAID 0, RAID 1, RAID5, and RAID 10 support for SATA storage devices

USB

          Chipset:

• - 3 x USB Type-C® ports, with USB 3.2 Gen 2x2 support (2 ports on the back panel, 1 port available through the internal USB header)

            Chipset+2 USB 3.2 Gen 2 Hubs:

• - 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 1 support

• - 7 x USB 3.2 Gen 2 Type-A ports (red) on the back panel

• Chipset+2 USB 3.2 Gen 1 Hubs:

• - 8 x USB 3.2 Gen 1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

        Chipset+USB 2.0 Hub:

• - 4 x USB 2.0/1.1 ports available through the internal USB headers

Internal I/O Connectors

• 1 x 24-pin ATX main power connector

• 2 x 8-pin ATX 12V power connectors

• 1 x CPU fan header

• 1 x CPU fan/water cooling pump header

• 4 x system fan headers

• 4 x system fan/water cooling pump headers

• 3 x addressable RGB Gen2 LED strip headers

• 1 x RGB LED strip header

• 5 x M.2 Socket 3 connectors

• 4 x SATA 6Gb/s connectors

• 1 x front panel header

• 1 x front panel audio header

• 1 x USB Type-C® header, with USB 3.2 Gen 2x2 support

• 2 x USB 3.2 Gen 1 headers

• 2 x USB 2.0/1.1 headers

• 1 x noise detection header

• 2 x Thunderbolt™ add-in card connectors

• 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/GC-TPM2.0 SPI V2 module only)

• 1 x power button

• 1 x reset button

• 1 x reset jumper

• 1 x Clear CMOS jumper

• 2 x temperature sensor headers

• Voltage Measurement Points

Back Panel Connectors

• 1 x Q-Flash Plus button

• 1 x Clear CMOS button

• 2 x SMA antenna connectors (2T2R)

• 1 x DisplayPort

• 1 x USB Type-C® port, with USB 3.2 Gen 1 support

• 2 x USB Type-C® ports, with USB 3.2 Gen 2x2 support

• 7 x USB 3.2 Gen 2 Type-A ports (red)

• 4 x USB 3.2 Gen 1 ports

• 1 x RJ-45 port

• 1 x optical S/PDIF Out connector

• 2 x audio jacks

I/O Controller

• iTE® I/O Controller Chip

H/W Monitoring

• Voltage detection

• Temperature detection

• Fan speed detection

• Water cooling flow rate detection

• Fan fail warning

• Fan speed control

• * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.

• Noise detection

BIOS

• 1 x 256 Mbit flash

• Use of licensed AMI UEFI BIOS

• PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features

• Support for GIGABYTE Control Center (GCC)

• * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.

• Support for Q-Flash

• Support for Q-Flash Plus

• Support for Smart Backup

Bundled Software

• Norton® Internet Security (OEM version)

• LAN bandwidth management software

Operating System

• Support for Windows 11 64-bit

Form Factor

• E-ATX Form Factor; 30.5cm x 26.0cm